Climbing 1-2
Brittania FRS Harness
Fall Arrest Harness
Full Body Harness with front and rear attachment points, leg and shoulder adjustment. EN 361
£62.00 + VAT
RGH 1 - Rear D Harness
Fall Arrest Harness
The RGH1 harness is a basic access harness fitted with a rear dee only. This harness is used primarily with a fall arrest lanyard to provide an operative with basic fall protection. When used in conjunction with a â twin leg lanyardâ the harness can be used for tower climbing, scaffold and general steel erecting, as the twin leg lanyard would provide continuous attachment through âdouble clippingâ. The harness is fully adjustable and is fitted with rip stitch indicators. EN 361
£29.99 + VAT
RGH 2 - Front & Rear D Harness
Fall Arrest Harness
This harness is fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 but has the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab system for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring. EN 361
£34.99 + VAT
RGH 4 Front / Rear / Side D Harness
Fall Arrest Harness
This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas. The RGH4 is a âmulti taskâ harness and will allow operatives to access almost any area in safety using a combination of products available. As with the RGH2, this harness is suitable for use in performing rescues from height. The wide belt fitted to the RGH4 is comfortable and provides lumbar support to the operative. The belt is also fitted with three gear loops for carrying tools leaving the hands free thus maintaining the required three points of contact when climbing. All of the features, combined with a good load bearing capacity, make this harness the ideal choice for the professional. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring. EN 361 & 358
£89.99 + VAT
Petzl Navaho Bod Full Body Harness
Fall Arrest Harness
The Petzl Navaho Bod has a wide, semi-rigid waistbelt for excellent support. Waistbelt and suspension seat lined with breathable perforated foam for maximum comfort when suspended. Foam shoulder straps are widely spaced to reduce neck chafing and are linked to the directional ventral connector for easy donning. If the waistbelt is weighted, the load is transferred to the shoulder straps, which distribute it over the shoulders. The ventral attachment point distributes the weight more evenly between the waistbelt and the leg loops during suspended work. The two lateral attachment points transfer the weight evenly around the waistbelt for comfortable surface-supported work. A sternal and a dorsal attachment point for connecting a fall arrest system. A rear attachment point on the waistbelt for connecting a restraint lanyard Three equipment loops with protective sheath. Slots for CARITOOL tool holder. Waistbelt and shoulder straps equipped with self-locking DoubleBack buckles Available in 2 sizes; Size 1 (70 â 120 cm waist) Size 2 (80 â 140 cm waist)
£188.50 + VAT
Britannia Basic
Fall Arrest Harness
Full body Harness with single rear attachment point, leg and shoulder adjustment. EN 361
£51.00 + VAT
Climbing 1-2
Search
